| Part Number | CLAP080MD01CW |
| Mark | CPT |
| Gréisst | 8.0 |
| Applikatioun | DPF |
| Opléisung | 800×600 |
| Zesummesetzung | CELL |
| Hellegkeet | 0 |
| CR | 500:1 |
| Faarwen | 262K/16.2M |
| Géigeliicht | No B/L |
| Interface | TTL |
| Panel Mark | CPT |
| Panel Modell | CLAP080MD01CW |
| Panel Typ | a-Si TFT-LCD , CELL |
| Panel Gréisst | 8.0 inch |
| Resolutioun | 800(RGB)×600 , SVGA |
| Display Modus | TN, Normally White, Transmissive |
| aktiv Beräich | 162×121.5 mm |
| Uewerfläch | Antiglare, Hard coating (3H) |
| Glas Déift | 0.50+0.50 mm |
| transmissivitéit | 5.9% (Typ.)(with Polarizer) |
| Kontrast Verhältnis | 500:1 (Typ.) |
| weisen Faarwen | 262K/16.2M (6-bit / 6-bit + Dithering), CIE193150% |
| Äntwert Zäit | 25 (Typ.)(Tr+Td) |
| Vue Wénkel | 70/70/50/70 (Typ.)(CR≥10)(L/R/U/D) |
| Signal Interface | TTL (1 ch, 6/8-bit), 50 pins |
| Input Volt | 3.3/9.6/18/-6V (Typ.)(VCC/AVDD/VGH/VGL) |
| Applikatioun | DPF |
| 8D2 FOG | Innolux | 8.0 | 800×600 |
| A080SN01 V4 | AUO | 8.0 | 800×600 |
| A080SN01 V7 | AUO | 8.0 | 800×600 |
| A080SN03 V2 | AUO | 8.0 | 800×600 |
| AT080TN50 | Innolux | 8.0 | 800×600 |
| CLAP080MD01CW | CPT | 8.0 | 800×600 |
| EE080NA-06A | Innolux | 8.0 | 800×600 |
| LS080HT121 | Innolux | 8.0 | 800×600 |
| LS800JT6001 | Innolux | 8.0 | 800×600 |
| Q08009-602 | Innolux | 8.0 | 800×600 |
| 8D2 FOG | Innolux | 8.0 | 800×600 |
| A080SN01 V4 | AUO | 8.0 | 800×600 |
| A080SN01 V7 | AUO | 8.0 | 800×600 |
| A080SN03 V2 | AUO | 8.0 | 800×600 |
| AT080TN50 | Innolux | 8.0 | 800×600 |
| CLAP080MD01CW | CPT | 8.0 | 800×600 |
| EE080NA-06A | Innolux | 8.0 | 800×600 |
| LS080HT121 | Innolux | 8.0 | 800×600 |
| LS800JT6001 | Innolux | 8.0 | 800×600 |
| Q08009-602 | Innolux | 8.0 | 800×600 |